The JK-82 is a pre-programmed OASiS alarm kit based on the Jablotron JA-82 control panel with built-in GSM communicator. Wireless communication with detectors and controllers. Easy installation.

The JA-82KRC is a basic configuration of the JA-82K control panel. The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.

The JA-83K control panel is a modular unit, with 50 addresses (marked 01 to 50). The heart of the unit is the JA-83K main board with 10 wired inputs (up to 30 using JA-82C module(s)).

A GSM communicator module which allows remote access via GSM and the Internet. Reports events to mobiles (SMS and voice messages) and monitoring stations. It has a built-in module for receiving pictures from the JA-84P camera PIR detector .

This module has LAN and PSTN phone line communication and allows remote access to the system by mobile phone or Internet.It can also report events to mobile phones and to alarm receiving centres. Can be installed inside the control panel case, connects to the control panel bus, telephone line and to a LAN (Ethernet)

Installed in a control panel, it allows alarm voice-reporting, ARC (Alarm Receiving Centre) communication and remote access via a telephone keypad. Tone dialling only.

The JA-80Z signal repeater can extend the range of remote devices whose signal is not strong enough to communicate with the control panel or whose communication is unreliable.

JA-82C module for 10 wired inputs, which expands the control panel wired input capacity

The JA-81E is to control/program the system and has a built-in proximity access card reader with an input for a separate door detector. The wired keypad is bus-powered.

This P.I.R. motion detector is for interior protection. It detects object movement having a human body temperature. The JS-20 distinguishes itself with excellent RF immunity.

The VX-402 PIR detector is used for human movement detection in outdoor areas. It is a dual outdoor detector produced by OPTEX.

The GBS-210 glass-break detector detects the breaking of glass windows. A dual technology detection method (air pressure and sound analysis) is used. It responds to the breaking of all glass types.

Magnetic door contact

The detector is a water flood indicator for rooms (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission.The LD-12 detector can be connected to the input terminals of alarm systems.

4-dimensional, all-in-one motion detector. * Two PIR sensors. * Microwave sensor. * Waterproof and all-weather resistant. * Pet immune. * Frontal Anti-masking, by active infrared. * Unique 360° Anti-masking, by microwave.