The JA-82ST is used to detect fire hazards in the interior of residential or commercial buildings. It is not designed to be installed in industrial premises. The JA-82ST detector uses wireless communication.
JA-82ST
JA-82ST wireless combined smoke and heat detector
JA-80Z
The JA-80Z signal repeater can extend the range of remote devices whose signal is not strong enough to communicate with the control panel or whose communication is unreliable. .
JA-80Z
JA-80Z Wireless Repeater Unit
JA-80L
The JA-80L is a mains-powered siren sounding alarms/exit/entrance delays. Depowering it during an alarm reports tampering (intruder verification). Enrolling:control panels,detectors,remotes,keypad inputs, JA-80H bell button.
JA-80L
JA-80L wireless internal siren
JA-80A
The JA-80A is a wire-free siren in a solid housing. Its lithium battery lasts up to 3 years.
JA-80A
JA-80A wireless outdoor siren
PC-02G
The PC-02G is a gray keyfob RFID card (standard EM UNIQUE 125kHz). The system can assign up to 50 keyfobs. For added protection, use the keyfob while entering the code.
Can be used on the JA-81F, JA-81E, JA-80F, JA-80E, 80H-JA or JA-80N.
PC-02G
PC-02G RFID entry keyfob - Gray
RC-82
A keyfob remote control with a weather-resistant design for the remote control of Oasis alarms and CA-1802A / 1803A and CA-340 car alarms with a child-lock.
RC-82
RC-82 two-button remote control
RC-86K
The RC-86K remotely controls setting/unsetting, triggers panic alarms, and controls other appliances. The big advantage is configuring it to 433 MHz (JA-60 systems, UC-216, UC-222 receivers etc). A 2-button version is also available.
RC-86K
RC-86K wireless keyfob - black
RC-89
The RC-89 doorbell (or panic) button works as a wireless doorbell button together with a JA-80 siren. Can be enrolled to the control panel as a panic button or to AC and UC receivers to operate relays.
RC-89
RC-89 Wireless doorbell button
JA-80T
Connects a control panel to a computer. Intended for installers or users to configure the system via OLink Software. Connects to the control panel bus and PC USB port. Works with JA-8x and JA-6x systems.
JA-80T
JA-80T - USB computer interface cable
AC-82
The AC-82 has 2 wirelessly controlled relays . The AC-82 is mains-powered (230V AC). Each relay can enroll remotes, thermostats, CP programmable outputs (PG), and wireless detectors.
AC-82
AC-82 wireless relay output module
RC-85
An in-car RC-85 remote control module allows you to operate an alarm or to control equipment (garage doors, lights, door bell). It can report an alarm from a car alarm. Powered by the car 12V DC.
