RFID entry key tag for the JA-100 system.125 kHz / unique Jablotron code
JA-191J
JA-191J RFID entry key tag for the JA-100 system
JA-188J
The RC-188J is mainly used as a wireless panic or emergency button. It is designed to be a remote control for setting/unsetting an alarm system or remotely controlling other appliances.
JA-188J
JA-188J wireless panic button
JA-189J
The JA-189J works mainly as a doorbell button. The JA-189J can also be enrolled to the control panel as a hidden panic button or to operate PG outputs.
JA-189J
JA-189J wireless door bell button
JA-192E
The JA-192E is a control segment for access control modules JA-112E, JA-113E, JA-114E, JA-152E, JA-153E, and JA-154E.
JA-192E
JA-192E control segment for access modules
JA-111H
The JA-111H is used to connect any wired detector to the JA-100 bus. The module communicates with and is powered by the system bus. It's an embedded module that can be mounted in a wired detector.
JA-111H
JA-111H Bus module interface for wire detectors
JA-110N
The JA-110N power output module PG offers a switching relay (16 A) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).
JA-110N
JA-110N Bus power output module PG
JA-111N
The JA-111N power output module PG offers a switching relay (2 A/60V DC) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).
.
JA-111N
JA-111N bus signal output module PG
JA-118N
The JA-118N eight-channel output module provides outputs for signaling the status of 8 sections, signaling IW / EW alarms in the 8 sections or the status of 8 PG outputs.
JA-118N
JA-118N eight-channel bus output module
JA-110I
The JA-110i indicator signals section setting or PG output activation (1-32) by a red LED . It is connected to the control panel via the bus.
JA-110I
JA-110I bus section/output PG activation indicator
JA-111I
The JA-111I indicates activations of a section or PG output activations (1-32) by multi-colored LEDs (red, green, blue and yellow).
JA-111I
JA-111I Universal LED indicator RGB
JA-110R
The JA-110R two-way radio module is used to connect wireless devices such as detectors, to the security system. For complete coverage of the secure area up to 3 JA-110R modules can be installed.
JA-110R
JA-110R bus interface for wireless components
JA-150N
The JA-150N is a wireless PG power output module (10 A/230 V AC). It copies the state of a selected PG output in the JA-100 system (PG1 to PG 32).
JA-150N
JA-150N wireless power output module PG
JA-190T
JA-190T RFID card and key tag reader for PC (connected by USB)
JA-190T
RFID card and tag readers designed to easily enroll the JA-190J and JA-191J into the JA-100 system by using F-link SW.
DE06-12
This switch-mode power supply is designed for powering a wireless keypad, and also for powering other 12V DC devices like GSM communicators or UC receivers made by Jablotron.
DE06-12
DE06-12 Power supply 12V / 0.5A
JA-190PL
JA-190PL multipurpse installation box for JA-100 modules.
